Quote:
Originally Posted by Shaun @ Tru6
The three bosses on the back of the cap are studs that are cast into the cap. The ring is fitted over and the bosses are set in the same way as a solid rivet. You'll have to Dremel or drill the bosses out to remove the ring.
Reattach the ring with with M3 screws and Loctite Red or low durometer structural epoxy on the threads.
 |
Thanks for the info Shaun. That is what I'll do.
I've had good luck bonding aluminum with loctite adhesives, add some m3 screws and it should be good to go!