Quote:
Originally Posted by otto_kretschmer
The gas line pressure after the meter is about 1/4 psi, or about 6-7 inches of water. You can run the extension with steel pipe with pipe threads sealed with telflon tape (yellow) and plumbers dope. I pressure test the line to 5 psi and see if it holds and do a soap bubble test on all the joints.
|
I just could not figure out how to get black pipe between 16 inch spaced studs without a bunch of couplings.
I thought about ordering the pipe and fittings from Home Depot but it’s over 30 miles away and not sure the fittings are the ones I need.