Quote:
Originally Posted by Steve Carlton
We did that one year. A friend of mine who owned a gourmet restaurant said to save the goose fat that comes out when you roast it. It's the best cooking fat ever.
|
Yes, and there's a LOT of it.
< edit > removed the bit about brining, turns out we didn't brine it, we did a quick (1 min) boil of each end of the thing (since we didn't have a pot big enough to boil the whole thing). I can't remember the reason, but there is one in the links below, I think.
When cooking, you poke small holes/slits in the skin all over the thing so the rendered fat can leak out as it's cooking. You'll want a deep roasting pan with a rack that holds the bird up out of the grease. In some cases, you could even have to empty the grease out of the pan part of the way through the cooking process.
We referenced these. Yes, one of the main things was the quick partial boil of the goose, flip it around and do the other end.
http://www.foodreference.com/html/roast-goose.html
https://www.seriouseats.com/roast-goose-and-gravy-recipe
Quote:
Done right, a roast goose is moist, flavorful, and supremely rich. The key is getting the bird's high volume of fat to render properly. This recipe, adapted from Cook's Illustrated, does that by pricking the skin and blanching the goose before roasting. Here, we also dry-brine it, to guarantee even juicier meat and crisp, flavorful skin.
Fill a large stock pot by two-thirds with water and bring to a boil over high heat. Wearing clean rubber kitchen gloves, grasp the legs of the goose and lower it into the water, neck end first, submerging it halfway. Keep submerged for 1 minute. Lift goose, allowing excess water to drain back into pot, then transfer to a work surface. Grasp wings and submerge other half of goose, tail end first, in boiling water and keep submerged 1 minute longer. Lift goose, allowing excess water to drain back into pot, then transfer goose to work surface. Pat dry with paper towels inside and out.
|
etc.... That hold the goose in boiling water for a minute thing is a huge pain. I had big, heat resistant rubber gloves that I bought just for that.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa

SOLD 2004 - gone but not forgotten