Our Fridgidaire dryer started beeping continuously and had an E68 code in the display which translates to a stuck button. Found a video to for getting the control panel into a self diagnostic mode and found all buttons were working as they should. Upon removing the circuit board, I found a module was loose where it was soldered onto the board, the soldering had actually cracked, so a friend of mine soldered it back like it should be. I put everything all back together and plugged up the dryer and all was good...
for about 2 minutes, then it started beeping continuously all over again. So from what I have read and watched on YouTube, once the beeping starts, and oh yeah there was the random light show also, all the little lights jumping around, so when this happens then it is time to replace the board. Oh well, the dryer was made in 2007 and the set was a gift so, I will replace the circuit board for about 125 bucks and maybe get another 10 years or so out of this set. It's been one of those days for sure.
Sent from my SM-N950U using Tapatalk