Quote:
Originally Posted by Steve G
Going off subject here....
Does anyone actually know for sure that the turbo and the SC squirters are the same outside diameter?
|
NOTE: see observations below about measured size of new squirters; the comments here are 6.0 mm may be erroneous
There are two part numbers for turbos:
930 101 015 00
930 101 015 50
The latter one shows up on Pelican as "oversize". Presumably both have the same large orifice, and the oversize refers to the barrel diameter (6.6mm instead of 6.0mm).
I found similar 911 part numbers:
911 101 011 01
911 101 011 51
The latter appears as "oversize".
As discussed in the links I gave above, you may have 6.27mm squirters (neither 6.0 nor 6.6mm) and need to drill the bores to accept the oversize 6.6 mm squirters.