|
Did you try the terminals for continuity? the pump may just be jammed?
If no continuity, then burnt out. Binned. If continuity, jammed and maybe able to free. I have freed a few.
Tap gently on concrete floor a few times. Hook to 12V with reverse polarity. Only power it for a second - just that initial kick. If it does not fire, disconnect. Repeat, repeat etc. It will heat up, even if jammed. let cool, try again. If you get it to move, flush backwards with fuel and you have a good working pump again.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Last edited by Alan L; 03-14-2022 at 08:41 PM..
|