Quote:
Originally Posted by wildcat077
ARP has their own torque specs ... for instance on my 944 2.5 race engine they want 100ft/lbs of torque as where Porsche asks for 66 ft/lbs , while the later engines 87 and on use the degree torque method.I'm kind of skeptical as well as i can imagine pulling the threads out of the block with 100 ft/lbs , i go halfway at 85 ft/lbs , although my engine is a non turbo but it does have a lot of compression.
|
You were smart to question.
My guess is you're still higher than you should be though. If our 911 value is 28 or 4 pounds higher, yours is likely only about 10 ft lbs higher or 75 ft pounds. You should contact ARP.
Matt