Quote:
|
Yes, you do, badly. I have the same suspension and measured the bumpsteer. 28mm isn't enough, I needed to use 42mm of spacers to get my bumpsteer to measure zero. See below:
|
Such drama, he's raised the outer ends of the a arm and steering arm 19mm nowhere near the 40mm that you did,
gotta agree w/ rlane, there is a large increase in twist on the steering arm when o/s rod ends are used
It's still in a decent range and if you want to further correct use rack spacers to raise the inner ends of the tie rod
see
this discussion