|
Registered
Join Date: Jul 2004
Location: Upstate New York
Posts: 3,280
|
Fish out the wiring that goes to the nozzles. You will see a white moles connector (maybe 4 or 5 pins). Either depin the connector, or, if that is not possible, mark and clip the wires where they go into the hood near the hinge (driver side, IIRC). You can butt splice them back together after the procedure.
Of course, there is no need to disconnect the wiper motor, it is not mounted to the hood.
__________________
Good luck, George Beuselinck
|