Quote:
Originally Posted by leonardo911sc
No i haven't.
How to do this? Slack the lines from the injectors or FD while pump is running?
Thanks
|
Leonardo,
Do you know how to test run the FP without running the motor? A good FD should not deliver fuel to any fuel injector or line when the FP is running (FD plunger @ REST). Pull out all six (6) injectors from the intake runners and place them in suitable container (just in case it leaks). Or simply placed injectors #1, #2, & #3 in one container for the test and do the same to #4, #5, & #6.
Removed the FP relay located in the trunk and bridge terminal 87A & 30 using a suitable jumper wire with in-line fuse. Turn the ignition switch to RUN (not START) long enough to look at the fuel injectors for observation. A few drips is OK but no significant amount of fuel in the container/s. Keep us posted.
Tony