Quote:
Originally Posted by 3literpwr
I have poly bushings in my '87 that worked well and recently installed the Rebel ones in my rally car. Fitting took some work and after freezing the sleeves, I did't need to JB weld them. So far so good and on a rally car, so they will see abuse.
|
I had to take some material off both of the rear sleeves to get them to fit. I used the JB weld but don’t think it was needed, they were a very tight fit.
__________________
78’ SC 911 Targa - 3.2SS, PMO 46, M&K 2/2 1 5/8” HEADERS, 123 DIST, PORTERFIELD R4-S PADS, KR75 CAMS, REBEL RACING BUSHINGS, KONI CLASSICS
|