[porsche930dude]

I made a gas tank for my fc-150 jeep. The old sender was toast so i drilled a hole in the middle and use it for a flange to back the tank. with nuts welded on. I had another sender from a cj so i extended the float arm but when i welded it it messed up the sender so i had to take it apart and solder up the connection that went poof. Also drilled and tapped it for a fitting to run the line in and keep it all in one spot. The baffle in the middle made it very hard to get the last end cap on because the square box didnt want to tweek into shape very well. End result was good other than the laps dont quite line up on top but nobody is going to see that anyway. I used the old filler neck. Lots of welding and its galvanized sheet. I havnt pressure tested it yet im sure there are plenty of leaks but Ill work on that another day.