Hello, over the last year ive been busy developing some new parts for 3.2, 964 and 993 engines. I thought you might be intetested in my progress to date. Before everyone starts asking, the aluminium for the cylinder heads is a propritary blend we have made in Germany.
The heads flow 288 cfm @ .500" @25 inches
On the intake from a 41 8mm port. Exhaust flow 201 cfm @ ,500" velocity on the intake is 320-350 ft per second. Exhaust uniform 315 ft per second.
Intake valve 53mm
Exhaust 42.5 mm
Top quality components to be used throughout, CHE guides and seats, tool steel retainers, SI valves, psi beehive springs.
The coil on plug valve covers are available for the following engines, early up to 3.2, 964, 993. The covers come with hardware and accept either 964 gaskets or on the 993 covers, the OE 993 gasket. Coils are Bosch and are from the Audi R8. Please note, these do not fit cars with powersteering. The powersteering pump must be deleted from the engine, and an electric pump installed.
Check out more stuff at:
https://www.facebook.com/DAVIDGOUKRACEENGINESNO1