|
You could probably fabricate something pretty easily. Take some duck bill vice grips and glue an insulator of your choice on each side. The bottom would be solid and the top would have a window opening for your iron. Clamp the wires in the device with your splice in the little window and solder them together. Bam!
It would hold your wires together securely and make it easy to get a good hot transfer. I fabricated a similar rig back when I was building a lot of 3 pin mic cables from quality components in the 80s. Once set up I could do them pretty quickly and many are still in use today.
__________________
2021 Cayman GTS 4.0L
2020 Macan (dog hauler)
|