Thanks, guys
I’d only use aluminum with a press in stud. Steel for thread in stud. With aluminum, the question is the depth of the hole and do I add any of the threaded stud to the standard depth…5-10mm?
MM… motorsport-tech is the company I’m talking to. They can do whatever I require. I’m sure they know the correct depth of the press in stud.
I test fit the wheel and a 35mm spacer will work. My MSI Racing studs are short. I need another 1” of extra threads (or 1.5” to my liking).
Quote:
Originally Posted by MMiller
Aluminum is all I've ever used on multiple Jeeps that were wheeled hard.
I have purchased from this outfit in NV.. USA made
https://www.motorsport-tech.com/
I think they will build you what you need if it is not a stock size they carry |
The spacer is hub centric.
Quote:
Originally Posted by asphaltgambler
I'd be more concerned that the spacer fits hub-centric to the hub and has protruded hub-centric for the wheel. I believe the threaded stud into the spacer would be a better choice.
|