I'm getting ready to sheetrock in the next day or so. I plan to install a workbench along this wall, about 16' long, as well as an overhead storage shelf. The bathroom occupies the corner shown on the left, and the top of the bathroom was sheathed over with plywood; I will basically extend that storage across over the top of the workbench.
So, to support that, I attached some 2x6's across where the workbench will attach and where the big shelf will attach. I was going to have them sheetrock up to the edge top/bottom of these pieces.
Is this a good or bad idea? One thing that popped into my head was 'how do they attach the rock between the studs. I don't know enough about sheetrock to know if this is an issue.
