Quote:
Originally Posted by unclebilly
Take the hose off the pressure sensor and blow into it when the inducer fan is running, see if it lights.
|
Many years ago on this board I did a TON of troubleshooting for a similar issue. It's been 10+ years, so I am not confident that I would point you in the right direction, but there is an old thread of mine. Just in case that helps...
http://forums.pelicanparts.com/off-topic-discussions/513342-hvac-furnace-fan-question.html
In my case, it was the pressure switch that failed, and then the cheap ($16) plastic pressure switch failed a year later, so I bought a slightly more expensive ($26) metal pressure switch and that fixed the issue permanently (until I sold the house).
My old thread may or may not help. Good luck.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa
SOLD 2004 - gone but not forgotten