Quote:
Originally posted by derek murray
You could consider protecting the bottom edge of the sheetrock, where it meets your 2x6 nailer with an 8" high piece of 20 gauge galvanized sheet metal (kind of like a backsplash on a kitchen counter). It would also provide a good place to magnetically attach sketches, notes, etc while your working.
|
Good idea; I saw one shop where this was done with polypropyline (I think) plastic sheet about 1/16" thick.
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had."
'03 E46 M3
'57 356A
Various VWs
|