[trond]

Hello forum

Considering my next move with my SC I took out the engine last week to re-install the 98 mm cylinders, that came back from re-plating. They are 10.5 CR but I measured 10.2 or so when cc ing which is better considering fuel availability. I have dual spark CDI, and for now SSIs,. And I have some nice cams also on the shelf. GT2-108s and also a set of new webcams 464/465. I have not decided which way to go...

I am thinking about moving away from my 42 mm Triumph ITBs I ran previous season because of noise and hassle with synchroniation. They work well apart from those issues but I really don’t enjoy the suction noise they make

Now a 993 plastic inlet manifold may be available locally. But how to install on my small port 3.0 heads ? I found some fairly expensive adapters in Australia. Beautiful but so expensive I am hesitating… They have 2 bolt adapaters for both 34 mm and 39 mm ports and I think maybe the 39 mms would be good, and enlarge/port heads accordingly

Is there are better way ? A 3.2 manifold would be easier certainly…