Wasn't planning on selling these, but someone asked me if I would be willing to part with them. These heads were taken off my motor (69S) in the early 80's at 75K miles. I took them to Competition Engineering in Pasadena (Ray Litz). When I went to buy new pistons, I was faced with the opportunity of 2.0 or 2.2 S Mahle pistons for the same price ($600). I decided to go with the 2.2 pistons (unfortunately no one told me I would be way down on compression) and I had the heads cut for 2.2 cylinders.
So, all new guides, 6 new ATE 3062 intake valves, 6 new TRW 3061 09 sodium cooled exhaust valves. This is the only valve job ever done on these heads. These heads were installed on the motor, but it was never started, so they only have 75K original miles on them before the valve job, and in perfect condition, no broken fins.
I am guessing that they would require 2.2 cylinders and some custom high dome 2.0 style pistons, or welded up and machined back to 2.0 specs. I also heard that Henry at Supertech made some adapters that could be used with the 2.0 cylinders.
Any help at Pricing would be appreciated.
Bob B
