Quote:
Originally Posted by proporsche
that el.connector i`m not sure it will work since there should be insolation cable and inside pick up wire of the temp....but all is possible..
the plug is from your AFM air flow meter ,where do you adjsut the fuel mix look here..
ivan  |
You are correct Ivan, looks like at some point the connection in the engine compartment for the CHT probably crumbled and instead of replacing the sensor with a updated 2 wire they cut and did a crappy splice on to the old 1 wire sensor with the new 2 wire sensor harness, talk about a hack.
The single wire sensor used the cyl head for its ground point and the 2 wire used a dedicated ground so that rig would work and appears that it has but if I was the OP I would be changing that thing out for an OEM 2 wire as a preventative maintenance as opposed to being stranded on the side of the road.
Richard