[QUOTE=Barrpete;4056894]I looked when I did the install & couldn't find any. It really is pretty easy though. Just remove the kick panels & unplug the harness from the fan. The wires are wrapped in a plastic sleeve that you'll need to cut back far enough to have room for the splice. There should be a brown wire which is the ground & a green with white stripe that is the hot. /QUOTE]
Sorry to resurrect an old thread. I’ve done a search for a couple of days and this is the only thread that details the inline 10A fuse for the footwell blowers that I’ve found.
I have an ‘86 as well and the footwell blowers are the only things left that I need to attend to. I have size 14 gauge fuse holders (w/ the red wires) but before I cut into the OEM wht/grn wiring, I was wondering if there is a cleaner way to do this. I have the heat shrink solder as well as the crimp type connectors.
Edit: I used the 3M fuse holders. No additional connectors or soldering. Just cut the grn/wht wire once and snap both ends closed over the butt ends.
http:www.crowbarelectricalparts.com/3m-scotchlok-fuse-holder/