Quote:
Originally Posted by jrwilson
I believe positive comes into the top of the fuse panel and goes through the fuses out the bottom, so if you want a fused connection you should attach at the bottom.
|
That has been the question I have had in my head. I built new lines (both fused) going to the head unit for both constant (attached at battery) and ACC attached at the fuse point "fresh air blower/cigarette lighter" BUT attached at the top of the fuse holder. It works as an ACC connection (stereo on/off with key) but I just want to make sure connecting at one point - top of fuse/bottom of fuse - isn't an issue.
Quote:
Originally Posted by jrwilson
One thing that confused me was that some of the fuses don't have any connection at the top, but it turns out some of them are connected on the backside of the panel.
|
I noticed this right away. Some fuses sadly were not right or in the wrong spot (previous owner)... After removing and cleaning contact points, tightening screws/connections and checking wires and could see the same thing you brought up.
Thanks!
Erik