jlex - In the procedure you describe below, when you run the fuel pump w/o starting car, where does the fuel end up? I see you mention that fuel will pass through filter. Are you disconnecting the fuel line at exit/discharge of fuel filter?
Thanks!
Quote:
Originally Posted by jlex
If you're not going to do the lines, the least you should do is drain all the old gas and replace with new plus dry gas, then jumper the fuel pump so it can run without starting the car to circulate the gas thru the filter without old stuff flowing through the injectors. Don't want to start it up right away as junk can flow into the injectors and mess them up. If you want to be careful, change out the filter after circulating the gas via the jumper before actually starting the car.
|