Quote:
Originally Posted by Tyson Schmidt
They use small 100mm output flanges. I would ditch the ABD differential and use an LSD with 108mm drive flanges
Other issue is lack of aftermarket gears. They’re different than G50 gears. Not a problem if your keeping them stock.
|
I know what you are trying to describe when you say ABD but that’s not a correct description on a G64, ABD is on the C2 993 series cars and when equipped with that option it applies a rear brake on one side or the other during wheel spin but IIRC it is only at low speeds say up to 40mph.
As far as installing a LSD in a G64 I think it can be done but again IIRC takes a lot of mods.