[icarp]

Hey Shawn , Ian here .
Looking at the install, you are on the right track. I would put a min of 4 vibration dampening attachment points across top and bottom. One bracket for each. It's ok to tie them together.
On the lower brackets , two blots for chassis, min per , and two more supports ,
upper the same 2 blot system.
The oil cooler is heavy and gets to bouncing way up there in the front ,
you don't want it too break.


What type of aluminum do you have , 6061 t6 7075 t6 ? I would only use one of these
All others will fail
The 90 degree bends are stress risers and are prone to cracking .

Ian