Thanks all for responses - helpful.
Quote:
Originally Posted by icarp
... a min of 4 vibration dampening attachment points across top and bottom. One bracket for each. It's ok to tie them together.
On the lower brackets , two blots for chassis, min per , and two more supports ,
upper the same 2 blot system.
The oil cooler is heavy and gets to bouncing way up there in the front ,
you don't want it too break.
|
A few additional brackets in between - could do that - the attachment points are there. The aluminum was bar stock, will have to confirm if either of 6061 or 7075 (hopefully - but like I said its from the hardware store - could be some other grade?). To make the bracket with right angles - bending is required, which makes me consider steel would be better material to use.