just fun to share, this is just a clean-up of the engine and front compartment old race car from 1972! the engine was replaced at the end of the 80 or early 1990 as the heads were built and modified then, I had the car for many years and used the car for track and street and was thinking all the time it was a 3,2 L short-stroke engine, but turned out to be 3,4 L,74,4 stroke and C&P 98 mm.
Then we run MFI and the twin-plug system, she was always running very well and very funny to drive. But it was time for a good clean-up and rebuild of the engine and we will improve some smaller parts to get some more hp, the engine builder back in the day made nice work and it was not the first engine he or she built!
Some pictures of the heads will be ready in some weeks, this is how the old engine builder built it! this just steps one clean up and the valve seats are done, we will open up a bit more and the MFI throttle bodies are ready so the heads guys can match them to the intake 100% and to the new heat exchanger from SSI Dansk 41-42 mm out.
Adjustable sway bar front 22 mm, old funny race type so you can change fast at the track! will be re-plated and restored suspension bearings and so on.
Will check the rear when we get that fare! step by step .