|
Registered
Join Date: Jun 2006
Location: Liverpool United Kingdom
Posts: 15
|
Yes it was UK RHD spec without AC, one cooling fan.
It runs on high speed so I guess with the standard 2.5 it would have been ok for cooling but when they swapped in the 3.0 they should have changed the Rad and fans!
Does anyone have a pin out for the 2 speed fan relay?
Are both fans ran off the same circuit at fast or slow speed or is each fan switched on and off independantly?
I'm tempted to just jump the second fan from the single fan wiring but would prefer to wire it to the intended origin in the harness or fusebox.
__________________
1981 RHD 924 2.0L non turbo
|