Quote:
Originally Posted by VA944
I am getting spark from the coil when doing the test on Clark's. I have tried a good coil off a running car and still nothing. I also have four spare coils that I tested and still nothing. I do have an extra ignition control module that I put in the car and it didn't change anything. I have cleaned the cap and rotor but I don't think either one of those are the issue because I'm not getting spark from the ignition coil and thats before the cap an rotor. I have also tried a different coil plug wire. Im pretty positive the speed sensor is the correct part number but Ill double check. I also replaced the cam position sensor on the back of the cam cover. If that was broken I believe the car would still start the timing would just be retarded. I do not have a factory alarm.
|
Did you do the coil resistance checks as outlined on Clarks? Yes you did voltage, but also test resistance.