So, how did I get the Hood Open, Frunk, trunk on this pristine 1973 LWB porsche 911 e.
1.) I took the passenger side front 2 bolts out of the front bumper-and one on the side, which lowered and widen the gap.
2.) Pulled the rubber out that was between the hood and bumper.
3.)wedged the hood open, with wood Puck, and shim..
4,) Sprayed the bolts( 2 bolts of hindge, hood side)down with PB Blaster
5.) 10mm, 12 point closed ended wrench, 1/4-1/2 turns till they came out.
6.) I started with the driverside, once out, the hood started to gap more.
7.) Then passenger side, wedge the hood open, to catch the finger latch in the release, or upper toward hood, so that there is more room to get the wrench in, repeat, 1/4-1/2 turns away from you, use stick to get the most turn, out of the bolt/ wrench..
Thanks Big HarryD..for the help, and links.
I will redo this procedure, and step by step, the photos when I'm on a confuser later