Are the two torsion bar tow loops are still there? Rearward, should be an opening in the bumper for the j-hook. Soft loops on the front torsion bars will work but be sure there’s no restriction or resistance.
Things to consider as I have found using Flat bed tow truck or flat bed open u-haul type car carrier trailer with my lowered 911 -
Have a couple of 2x10 8’ planks handy to raise the height a bit to clear the trailer or flatbeds approach angle. The lowered stance could clip the point where spoiler meets the trailer/truck bed due to the angle these points meet. The longer the ramp, the angle lowers. Having blocks of 2x10” lumber closer to the top of the ramp or on the bed will also provide some height to avoid clipping the spoiler/dam.
This is an example of approach angle hitting a low point, applies to both front spoiler and if steep, the center…
