Quote:
Originally Posted by boyt911sc
Que,
This was my problem with the cross-over oil lines purchased from Pelicanparts. The new oil line/s from PP did not come close compared to an old used part shown in the pictures below.
Tony |
Tony... I just faced exactly the same misfit with this pipe. Bent it into position. Did so off the engine as I suspect doing so on the engine would tear the case. Amazing the manufacturer can't make these things so they are correct.
.
__________________
Karl ~~~
Current: '80 Silver Targa w /'85 3.2. 964 cams, SSI, Dansk 2 in 1 out muf, custom fuel feed with spin on filter
Prior: '77 Copper 924. '73 Black 914. '74 White Carrera. '79 Silver, Black, Anthracite 930s.
|