Quote:
Originally Posted by rockfan4
I believe that wrench only works with the specified Precise keyless chuck. It doesn't work with any chuck. Your best bet would be to replace the keyless chuck with a keyed one, assuming your drill has a standard thread on the output. To remove a chuck, you first remove the screw inside it. It will be left hand threaded. Then the chuck unscrews normally. When we used to replace keyed chucks, you'd put the key in one of the holes and smack it with a hammer to loosen the chuck. Not sure what you'd do on a keyless, but I know I've done it before.
|
Thanks rockfan! Whether or not it works I've learned something new for the day. Now I can take a nap. 
__________________
Si non potes inimicum tuum vincere, habeas eum amicum and ride a big blue trike.
"'Bipartisan' usually means that a larger-than-usual deception is being carried out."
|