Quote:
Originally Posted by rwest
Hi Ben,
Just looked at my setup and the black wire from the 123 goes to the white wire from the MSD.
Blue goes to ground, red goes to power and I opted not to use yellow, so it is taped up.
Rutager
|
This is pretty invaluable information.
Contemplating a 123Ignition mainly because by the time I muck around changing the springs in my coil and most likely a bunch of other stuff once I get in to it, it's still going to be a 50 year old core.
Realise that this thread is a few years old now, but I'm reading this as it's only the black that goes to the white of the MSD. The blue to a ground (where the coil is?) and the red replaces the slot in the fuse box where the red of my Petronix currently is
People in other threads appear to be happy with the base tune of the Bluetooth version of the Tune+ but in speaking with 123 today they said with the Bluetooth you'll definitely have to fiddle with the map and suggested getting the switch version for a quiet life. (Car is a 1973 911TE on which the vacuum has been plugged long before I had the car)
Has anyone found the base map on the Bluetooth to be good to go or did you lose years off your life fiddling with it?