[jbar1]

I just purchased one from Pelican and installed the software and user's guide. Hooked up to my '99 Boxster and went effortless through the first couple of menus with no problem. When I opened the "Actual Values" menu under Engine, I selected "RPM" and the boxes for the two cams. The black boxes appeared on the right side of the screen but they did not display any values nor did the screen show a real time display of the values.

Thinking I did something wrong, I did the procedure once again from start to finish with the same results. I finally call Durametric and spoke with a very nice gent who informed me that there is a problem with the tester and the 1999 Boxsters that will require a software fix. I then asked how long they have known about the problem and what they are doing about it. Two months was his response and when the software fix is working the software package will be updated and posted on the internet.

I am happy with the unit but I am totally amazed at how anyone, manufacturer or vendor, can sell a product that does not support what they advertise. Do the right thing and inform potential buyers of the products limitations at least until a fix has been developed and tested.