[Llamalord478]

About a year ago I bought a 944 hoping to make it my next daily, drove it two hours home and ran it about a week until a no start forced me to move it into the back of my dad's garage while I attended Uni. Now that I'm back for the summer I plan to crack open the project again but this time with more information. Since it was benched me and my dad have done quite a bit of work to it; replacing a ton of problem parts and bad wiring, yet our no start is persistent. I'll list what we did in as best order as i remember it. The main issue revolves around the fuel pump not sending fuel to the rail.

New battery, spark plugs, speed + reference sensor, and DME relay. We noticed it was a fuel issue so we assumed the DME and sensors would fix it but alas we had more problems.

Next we replaced the ailing fuel pump and fuel filter, and made sure everything was wired properly there and now could be forced to run manually. Also the line from tank to pump.

We then discovered multiple electric issues, and ended up replacing the ECU, engine wiring harness, distributor cap and rotor, and ignition coil. We also took apart the fuse box and tested some connections and cleaned it up. Also we replaced some vacuum lines and did some other unrelated stuff like sunroof maintenance and re-sealing the back window.

That's where we're at now, It cranks and sparks but still won't send fuel. We can bypass and force the pump to run and it will fire, but nothing happens under normal circumstances. I believe that the Tach rises when on, but no bounce. Our current suspect is wiring from the the ignition not reaching the ECU or fuse-box. Anyone have any tips or ideas before we end up tearing the dash apart? I can grab pictures tomorrow and do any tests you all will have to help narrow it down. Thanks!