Hi all,
I had the hydraulic rams on my 2003 C4S refurbished, replaced them and filled the system with hydraulic fluid during three or four operations of the top.
The fluid level is good but when lowering the hood, it hesitates for a second or two about two thirds of the way down, then lowers in place but seems to sit about a half inch too far back and the clamshell does not close.
To raise the hood I have to pull slightly on the hood as the button is pushed so it can pass the clamshell and then the hood closes and locks in place correctly and the clamshell closes but the quarter light windows do not close.
Any ideas how I fix this please?
