Quote:
Originally Posted by echecsqueen
Do I need to add a fan to the rear condenser? I didn’t know that was an option
|
Maybe, but not yet. Address the switch first. If it is installed in a schrader valve then it can be removed without evacuating the system. Then put in a correct Trinary even if you don't use all the wires just yet. It belongs after the condenser though not in a vapor line.
I think you have and old Kuehl line if it is by the compressor and this location has been updated in recent years to go in the #6 line where it belongs. Unfortunately that means replacing two lines. #8 Compressor to Condenser and #6 Condenser to Drier or wherever yours goes.