Quote:
Originally Posted by herr_oberst
I'm way too fuggin' lazy to wax my chain. And on a gravel bike? Ha!
But I do have an ultrasonic trick: Put the chain or cogs into sandwich sized tupperware and fill with solvent to cover the parts, put that in the (EMPTY) ultrasonic and then fill the ultra tank with water till the two liquids are at the same level. It keeps the tank clean and it reduces the amount of cleaner.
|
Good tip.
I’m positive that the total time involved in waxing the chain is much less than keeping a liquid lubed chain driveline and bike clean- just so much greasy slop all over the rear wheel and bike. Which means either a lot of time degreasing or riding a filthy bike that is slowly grinding all of your expensive gears with a dirt paste!