|
Registered
Join Date: May 2002
Location: Portland, Oregon
Posts: 12,721
|
Glad there was only minimal drama.
I have had what I believe to be a few close calls like this. What I see is when this happens the jack stand is on the outside edge of the torsion bar cover. If you raise the other side, it creates an angle that could cause the stand to slip off. I always check the stand after both sides are raised to verify they are as close to the body as possible.
__________________
Harry
1970 VW Sunroof Bus - "The Magic Bus"
1971 Jaguar XKE 2+2 V12 Coupe - {insert name here}
1973.5 911T Targa - "Smokey"
2020 MB E350 4Matic
|