Got some stuff done today...
Before pic:
Removed the battery - I will need a larger one with more capacity. Removed the battery bracket as well.
Removed the PWM controller for "old" kluged fresh air blower (marine bilge blower fan).
Disconnected fuel pump wiring so that I could remove the fuse block.
Put some new insulation tape on Evap Blower outlet ducting and installed both pieces. Connected the one main outlet to the center console vent. I used original car ducting but I might switch to a smooth inner flex duct down the road.
I think I will relocated the fuse block vertically where the cruise control computer used to be. A single bracket between upper and lower attach points on the car should do it. This should be out of the way of ducting and slightly closer to the new battery location (the car's original battery location).
After Pics:
I need to clean up the wiring and add some of the smaller eval blower outlet ducting. I also need to reroute the main starter cable as I moved it and cut it shorter when putting the battery in the Smuggler's Box. Maybe a fuse or a disconnect to join the two battery cables...