|
Registered
Join Date: Dec 2005
Location: Silver Spring, MD
Posts: 57
|
OK, I'll answer the question you asked:
Place solder on the domed portion of your piston; 2 o'clock and 8 o'clock in your photo. This measures piston to head clearance once engine is rotated with cylinder head in place and cam timed.
Deck height by definition is distance from piston deck (not considering the dome) to top of cylinder when at TDC.
__________________
michaelmount
Motorsports Engine Development (Retired)
Last edited by michaelmount123; 08-28-2023 at 01:21 PM..
|