Quote:
Originally Posted by Walter_Middie
Are you sure you are on the compression stroke and not on the exhaust stroke? If you have the upper valve cover off, is the #1 intake valve loose? If the valve is tight, then you are on the exhaust stroke, and the rotor will be pointing the wrong direction.
I assume you have not removed the distributor? The rotor has a notch in it and you shouldn't be able to install the rotor at any position - it only goes on one way.
|
Yes it was at tdc on cyl 1 compression stroke when the rotor was set to line with with the notch on the distributor.