|
Thanks for your input. It looked to me like the right hand side of the engine was running rougher than the left. I might even have heard some pinging or misfires but I'm not sure. I did not notice this before I set up the timing (before it was roughly around 0° or even a bit BTDC on idle).
Cam timing is spot on but you are absolutely correct about the carbs. Right now I just threw them on the way I took them off. I have a vacuum gauge on order and will to the basic setup the next time I start the engine.
Just looking for some basic infos I'm risking anything with the current setup (see questions above).
Last edited by Swallowtail; 10-19-2023 at 06:06 AM..
|