Quote:
Originally Posted by john walker's workshop
The left tensioner metal line needs to be 09 on the last two numbers. It's got an S curve that fits the new cam line. Or, you can just carefully tweek the straight one.
|
Hi, thanks for replying. Are you saying that the part number for the new hard line from the tensioner ends in 09?
The issue with that line in addition to the ferrule not lining up is that it's a little short and when I dry fit it the banjo fitting is not flush and the hard line hits the side of the plug well so moving the ferrule would only solve half of the issue unfortunately.
I can't be the only one with this issue unless I have a Unicorn?
Thanks Again!!!