Quote:
Originally Posted by boyt911sc
Ray,
The engine wire harness for SC’s has the 14-pin connector. This is a standard electrical part for all SC’s to enable to disconnect the motor from the chassis aside for the other mechanical connections. There should be 14-pin connector in your chassis and motor.
Could you post a picture of the engine relay panel located in the engine bay (driver side)? Thanks.
Tony
|
My mistake in my original post I mentioned that I had tested at the 14 pin plug on the rear relay and stated that it was on the front - when looking at it it is in front of you-
But it’s on the rear of the relay box. And yes it’s been tested thoroughly including the plug and socket - all is good