[rswannabe]

Next up: seat heaters! In the past I’ve added seat heaters to my WRX l and my e46 M3 and they were the single best mods I made to those cars. I’ve had a set ready to go into this car for a while, but hadn’t made the time. Frankly I was a little hesitant as it can be an involved job to skin and recover seats to install the heating elements. I needn’t have worried, the Recaro sport seats proved to be surprisingly easy to do this with.

To do my seats all I needed to do was take out the two pivot bolts to separate the backs from the bottoms.



For the seat bottom there were four hog rings securing the rear of the cushion to the Webbing.



With those hog rings removed there was enough access to slip the heating element in between the foam and the interfacing behind the leather.







Then it was just a matter of installing 4 new hog rings to rescue the rest edge and the bottom was done.