[GregAmy]

Addendum (and we're WAY off the original post lol)

Reminder, I'm usign SuperbrightLED.com 1156 and 1157 replacements, and the Novita EP35 flasher.

All is fine with parking lights off. But click on the parking lights and/or headlights and the rear turn signals (and dash) will flash but the fronts won't, they just illuminate the second filament.

I put the incandescent bulbs back in the front positions only, and it all works fine.

Note that the front turn signals are 1157 bulbs, dual element, whereas the rears are 1156, single element. The 1157s use a common ground for parking and turn signal...these chassis use of the 111 ur-Beetle 3-pin flasher relays and does something inside to illuminate the single turn-signal indicator in the dash. I suspect that turning on the parking lights does something funky to the ground, voltage, and/or current/load path. I've not traced down the wiring to get a solid read on it.

My next attempt is to put one of the load resistor packs on each front turn signal circuit ONLY, see what happens.

Seems like a lot of trouble? Sure. But I prefer the way LED turn signal and brake lights "pop!", which seems to catch the eye of inattentive drivers...it works well with the "never saw ya" 914. - GA