[rfuerst911sc]

So this morning I disassembled the ground wires . Cleaned up all dirt and lightly sanded the ends . The engine mount bolt was quite corroded . Other than that didn't find a smoking gun . Reassembled with dielectric grease on every cable end .

Removed fried throttle cable and installed new . Throttle lever moves nice and smooth . I had the hood and side panels removed and before putting them back on I figured I would try it out . Turned the key and heard a fuse pop 😩 .

The tractor has a 4 fuse panel . They are 15/15/30/15 Amp. The 30 Amp is what popped . And of course I am out of them so need to go get some . Ran my fingers over every wire bundle and felt nothing like damaged insulation .

I wiggled and pushed/pulled every connection and found nothing . Will get some fuses and see what happens . And I confirmed the throttle cable does not touch the radiator it is a good inch above it .